Touch Screen Semi Automatic Capsule Filling Machine Made Of Stainless Steel Button

Touch Screen Semi Automatic Capsule Filling Machine Made Of Stainless Steel Button

Product Description of Capsule Filling Machine​

The machine is designed and further improved on the base of original full automatic capsule filling machine from both home and aboard. With high technology and exclusive performance, it has reached international leading level.

It is an ideal equipment for capsule and medicine in pharmaceutical industry which is in full compliance with GMP requirements.It adopted PLC programmable controller, stepless frequency inverter, man-machine interface to operate and touch screen display (Type A&B is a Touch Panel operation).

With fault or lack of material, the machine will automatically alarm and shut down, and eliminate automatic alarm after troubleshooting. NJP-800/1000/1200 owns functions of password input, parameter setting, the print data, resetting.

All the key pieces of the drive shaft and the camshaft for the machine are adopting the imported materials.

Detailed Parameters of Capsule Filling Machine

Trait of Capsule Filling Machine​

1.Good-looking appearance, exquisite workmanship, eases of operation, simplicity of use.

2.Filling seat and measuring plate are designed as one unit to make measuring plate and filling rod without deviation, avoid friction between filling rod and measuring plate, improve its precision, furthermore, it enhances the machine’s life greatly.

3.Ineligible capsule can be eliminated automatically, the medicine in the capsule can be recycled and be reused, thus it can improve greatly the economic efficiency.

4.Simplicity and convenience of dismantling, installation and clean, various models of mould can be replaced (the mould of 800 model and 1000 model as well as 1200 model can be replaced mutually on the same machine) (and the mould of 200 model and 400 model as well as 600 model can be replaced mutually on the same machine) to meet different capacity requirements.

Working Principle of Capsule Filling Machine

The working principle of the automatic capsule filling machine is divided into two parts, which are the movement of the capsule and the filling of the medicine:

1. Movement of the capsule
During the filling process of the intermittent capsule filling machine, the movement of the capsule depends on the indexing box for intermittent and discontinuous rotation. The filling volume of the capsule is mainly determined by the volume of the metering

disc hole. The hollow capsule is in the capsule hopper, the main board moves up and down, the capsule enters the capsule guide groove by its own gravity, and then the horizontal fork and the vertical plug make the capsule cap upward and the

capsule body downward into the upper and lower modules. The capsule body and capsule cap are separated under the action of the device, and then the module enters the powder filling station.

2. Drug filling
The sensor in the powder holding ring controls the screw feeding rod above it, and the medicine is continuously added to make the height of the powder in the powder holding ring constant. position, push the drug column into the capsule body. After that, it

enters into the capsule rejection, capsule locking, finished capsule discharge, module cleaning station in turn, and then enters a new round of station cycle, and the cycle begins again and again.

Product Show of Capsule Filling Machine

Application of Capsule Filling Machine

Other Products We Manufacture:

1.Automatic Labeling Machine

2.Capsule Counting Machine

3.Pharmaceutical Machinery Equipment

4.Automatic Cartoning Machine

5.Powder Mixer Machine

6.Freeze Dry Machine

7.Automatic Packing Machine

8.Capsule Filling Machine

9.Herbal Extraction Equipment

10.Liquid Filling Machine

capsule filling device

capsule filling equipment

Touch Screen Semi Automatic Capsule Filling Machine Made Of Stainless Steel Button Images